CAD product visualisations. Colours and surface appearance are indicative; physical samples and the agreed specification govern.
APG / WELDED DEVELOPMENT RANGE
Steel roundbar Juliet guards
20 mm solid round infill with continuous welded rails and flat posts. Four proposed widths, developed around the supporting structure.
No order or payment is taken on this page.
MEASURE YOUR PROJECT
Start with the clear opening.
Measure the clear distance between structural reveals. Show the window, sill, door movement and the surface someone can stand on; those levels determine the final guard position.
Include front and side photographs, indoor or outdoor location, and the intended use.
Add your project dimensions →Study top height: 1,100 mm above a proposed finished walking datum. This is not a confirmed site installation height.
FIXING AND CONSTRUCTION
Continuous welded framing.
Four side fixing plates, with front-face or reveal fixing selected above. Actual opening and anchor details require project review.
1 / Confirm structure and levels.
Record the structural material, dimensions and finished levels. Check access, obstructions, edges and waterproofing.
2 / Resolve the actual fixings.
Anchors, plates, welds and local structure must be verified together. Drawing holes are not a selected anchor system.
3 / Fit to project drawings.
Plan handling, temporary support, anchor installation and inspection before fitting. These CAD views are not an installation guide.
SELECTED CONFIGURATION
Dimensions and construction.
- Selected dimension
- Top rail
- 60 × 10 mm continuous flatbar
- Posts and infill
- 40 × 8 mm end flatbars; 20 mm solid round rods welded to the continuous rails
- Lower framing
- 40 × 10 mm continuous bottom perimeter rail; no below-sill mounting frame
- Maximum nominal infill gap
- Metal frame width
- Net model mass
- Support
- Four side fixing plates, with front-face or reveal fixing selected above. Actual opening and anchor details require project review.
- Technical status
- CAD, BOM and preliminary calculation studies prepared. Qualified fabrication, local connection and anchor verification remain outstanding.
Study dimensions are not an approved site detail. Request the current technical pack with your project information.
Before you enquire.
What does the selected dimension mean?
The selected number is a frame reference. Use the displayed steel frame width and example opening for your chosen fixing, then send the actual structural opening for review.
Can I order this now?
Send a project enquiry. Final suitability, specification, price and lead time must be confirmed before ordering.
What is included in the technical pack?
Current STEP geometry, BOM, preliminary calculations, support-force information and draft fabrication/installation notes. These are development records, not a certified design or permission to install.
YOUR PROJECT
Send this configuration.
Your selections are added automatically. Include location, use, supporting-structure details and any photographs.
A different size or route?
Send your dimensions so we can review the project.
Current steel Juliet technical review pack
Four side fixing plates replace the previous steel Juliet supports. Reference sizes are not clear opening dimensions. Models and draft documents are for technical review, not manufacture.
Download current steel roundbar CAD pack Measurements and technical notes