900 mm · aluminium · isometric geometry
CAD product visualisations. Colours are indicative; physical samples and the agreed coating specification govern.
JULIET GUARDS / APG
Flatbar Juliet guards
Continuous flatbar framing. Clean vertical lines. Developed around your project.
No order or payment is taken on this page.
MEASURE THE SPACE
Start with the clear opening.
Measure the clear opening between the structural reveals. Show the window, sill and the floor someone can stand on; those levels affect the final guard position.
Send a front photograph, a side photograph and the intended use. We can review the layout and identify the fixing information needed.
Add your project details →Study height: 1,100 mm above a proposed standing datum, with 50 mm below the uprights. These are not confirmed sill or window-clearance limits.
CONTINUOUS WELDED CONSTRUCTION
Two face-welded lower strips.
The top rail and two continuous lower strips connect to end plates at the structural reveals. The lower strips are face-welded across the uprights; there are no intermediate slab fixings.
1 / Confirm the structure and levels.
Check both structural reveals, the accessible standing level and window movement.
2 / Resolve the fixing detail.
Anchor type, plate behaviour and weld specification must match the actual supporting structure. Study fixing holes are not an anchor selection.
3 / Install to verified project drawings.
These geometry illustrations are not installation instructions. A final project fixing and installation detail is required before fitting.
SELECTED CONFIGURATION
Dimensions and construction.
- Selected width
- 900 mm clear structural reveal opening
- Metal frame width
- 890 mm
- Top rail
- 60 × 10 mm flatbar
- Uprights
- 50 × 10 mm flatbar
- Lower frame / fixing
- 80 × 10 mm flatbar, broad faces vertical and welded across the uprights
- Construction
- Continuous top rail and both lower strips; no centre jointContinuous top and bottom rails; four side fixing plates
- Technical status
- Geometry and preliminary calculation studies prepared. Full material, weld, supporting-structure and fixing verification remain outstanding.
All dimensions shown are development dimensions. Standing datum, sill/window clearance, gaps and climbability require project review.
Before you enquire.
Can I buy a standard kit now?
These four proposed widths are available for project enquiries. Final suitability, fixing details, price and lead time must be confirmed before an order.
What does the selected width mean?
It means the clear structural reveal opening. The proposed metal frame is 10 mm narrower, allowing 5 mm solid packing at each side.For the revised steel Juliet it is a frame reference. Check the displayed frame width and example opening for the selected fixing, then send your measured structural opening for review.
Can I request the technical pack?
Yes. Ask for the current geometry and preliminary technical information in your enquiry. Verified fabrication and installation details remain separate requirements.
YOUR PROJECT
Send this configuration.
Aluminium · 900 mm clear structural reveal opening
Your selections will be included automatically. Add the location, intended use and photographs; ask for help with fixings or the technical pack here.
A different size or layout?
Tell us about corners or an unusual opening so we can review the project.
Current steel Juliet technical review pack
Four side fixing plates replace the previous steel Juliet supports. Reference sizes are not clear opening dimensions. Models and draft documents are for technical review, not manufacture.
Download current steel flatbar CAD pack Measurements and technical notesAluminium / Technical review
Aluminium Juliet draft specification downloads
Aluminium variants only. Nominal dimensions, source CAD, structured data and draft specification text for four J6 clear openings. Not for construction or manufacture, NBS approval or a tested load rating. Actual material/HAZ/weld and anchor checks remain open; the gravity-movement study is partial and does not establish self-weight resistance.
Download aluminium technical draft pack (ZIP)
Confirm project suitability and final details with APG.